[Gristmillers] Williams mill sifter parts

[Kevin]

Available.yes

Affordable.no(at least not on my budget)

 

Robert in parts told me it would be about $600-$700 for a complete sifter
and the hardware to mount it.  I asked about just the hardware, and I could
build the sifter.he said it would still be around $500 or so plus shipping.

I guess I'll be fabricating some "it'll work" parts.

Thanks for the help.

Kevin

 

Kevin S. Harbin

720 Penny Lane

Seneca, SC 29678

kharbin at nctv.com

(864)972-3746 home

 

From: gristmillers-bounces at gristmillers.com
[mailto:gristmillers-bounces at gristmillers.com] On Behalf Of Ken Christison
Sent: Sunday, March 28, 2010 3:27 PM
To: gristmillers at gristmillers.com
Subject: Re: [Gristmillers] Williams mill sifter parts

 

Kevin,

The castings should be available from Meadows. meadowsmills at charter.net

Telephone 

1-800-626-2282  

336-838-2282 

Take care.

Ken


kEVIN wrote: 

I'm working on a 24" Williams mill with the Fairbanks Morse stencil on the
drive pulley side of the case.  It is missing the sifter parts and the
gentleman who owns it would like to put it back.  Are the sifter
parts/castings available anywhere?  If not, I can fashion something that
will work using the catalog found on the gristmillers page.  The mill is a
Yellow with black trim mill and can be seen running last may by clicking the
following link.

 

Thanks for any help,

Kevin

http://www.youtube.com/user/ArtLinkloader#p/u/39/VZg7B0XsRSM

 

 

Kevin S. Harbin

Seneca, SC 

kharbin at nctv.com

 

 

 



  _____  



 
_______________________________________________
Gristmillers mailing list
Gristmillers at gristmillers.com
http://lists.gristmillers.com/mailman/listinfo/gristmillers
  

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.gristmillers.com/pipermail/gristmillers/attachments/20100329/183f1e20/attachment.html