[Gristmillers] meadows meal sifter

[Kevin]

Here is a link to a video of the sifter running on a test run.  I do not have the top cover on it or the side panel so I could get a good feel for how it was working.  I’m pulling it with a 3hp M international and it is turning about 48rpm.  If I can find a slightly smaller drive pulley for the engine, I’d like to get it down in the 36-40 rpm range.  I haven’t figured out my video editor yet so there is a lot of useless shots.

 

 <http://www.youtube.com/watch?v=Lg8SfgWZcG4&feature=channel> http://www.youtube.com/watch?v=Lg8SfgWZcG4&feature=channel

 

Kevin S. Harbin

Seneca, SC 

 <mailto:kharbin at nctv.com> kharbin at nctv.com

 

 

From: gristmillers-bounces at gristmillers.com [mailto:gristmillers-bounces at gristmillers.com] On Behalf Of jimmy henderson
Sent: Friday, March 19, 2010 7:34 PM
To: gristmillers at gristmillers.com
Subject: Re: [Gristmillers] meadows meal sifter

 


Keven, sounds like you found a good sifter. Sometime when you have time could you e-mail a picture or two of the sifter so that I might build one similar. Thanks,
Jim Henderson, Dawsonville GA. 770-887-5607




 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.gristmillers.com/pipermail/gristmillers/attachments/20100328/9d9cccdb/attachment-0001.html