[Gristmillers] Need top for pillow block Mill SN: 3287 -16"MeadowMills

[Ken Christison]

Ron's bearing pour can be found on the engine list resources page at:
http://www.oldengine.org/members/christison/resources/

Ken

gritsnc at gmail.com wrote:
> Ken should be posting the pics of my bearing pour to maybe help in 
> your new cap purchase. Doing the top is the easiest using a grease cup 
> as the sprue and Play Doe for containing the babbitt. I also drilled a 
> small vent hole on the car end of the long cap to reduce the cold 
> shut. You may not have to do that. But it doesn't hurt as it seals 
> itself up.
> Good luck,
> Ron