[Gristmillers] Mill picks

[Jim Fackert]

the meadows is just an air chisel with the end ground right. You can get 
those from Harbor freight for around $20. Regrind a couple of weld 
chipping hammers for manual use...

gritsnc at gmail.com wrote:
> Keep us informed on your progress. I have some to dress myself. Bought 
> one of those carbide air hammer type from Meadows but very unsure how 
> to go about it. Even after talking to the Meadows dresser.  Especially 
> a grits dressing.  Pro millers and some in the know say don't get too 
> sharp but don't know exactly what that means. I know about the furrow 
> taper and no dish requirements but that's about all. 
>
> On Tue, Jan 13, 2009 at 12:24 PM, Fred Ross <freddieross at gmail.com 
> <mailto:freddieross at gmail.com>> wrote:
>
>     Where can someone get there hands on a mill pick at a reasonable
>     price.  Have just got me a new mill, 24" Williams and fixing to
>     crack it open and see what I have got, might as well dress the stones.
>     _______________________________________________
>     Gristmillers mailing list
>     Gristmillers at gristmillers.com <mailto:Gristmillers at gristmillers.com>
>     http://lists.gristmillers.com/mailman/listinfo/gristmillers
>
>
>
>
> -- 
> Carolina Grits & Co.
> Visit us at Carolinagrits.com
> ------------------------------------------------------------------------
>
> _______________________________________________
> Gristmillers mailing list
> Gristmillers at gristmillers.com
> http://lists.gristmillers.com/mailman/listinfo/gristmillers
>