[Gristmillers] Meadows book

[gritsnc at gmail.com]

So, nothing stamped on the end grains above the spout?  ie; style (followed
by a number) and then a 4 digit number?  Across both end grains of the bed
and runner housings?
Ron

2009/4/29 Kevin Harbin <kharbin at nctv.com>

>  I thought I would resend this in case it got missed.  I was wondering
> what Meadows book had the IHC serial #’s in it.
>
> Thanks
>
> Also, my camera died last weekend and I had to buy a new one.  I’m going to
> try to get pics of the shaker mechanism this evening.
>
>
>
> Kevin
>
>
>
> Kevin S. Harbin
>
> Seneca, SC
>
> *From:* Kevin Harbin [mailto:kharbin at nctv.com]
> *Sent:* Friday, April 24, 2009 5:02 PM
> *To:* 'gristmillers at gristmillers.com'
> *Subject:* RE: [Gristmillers] mill to rebuild
>
>
>
> Are you talking about Meadows Mills: The First Hundred Years?  If so, where
> in the book is it?  If not, what other book is there that I must own?  I
> can’t pass up another Meadows book.
>
> I’ll try to get those pics up this weekend.
>
>
>
>
>
> Kevin S. Harbin
>
> Seneca, SC
>
> *From:* gristmillers-bounces at gristmillers.com [mailto:
> gristmillers-bounces at gristmillers.com] *On Behalf Of *gritsnc at gmail.com
> *Sent:* Friday, April 24, 2009 10:37 AM
> *To:* gristmillers at gristmillers.com
> *Subject:* Re: [Gristmillers] mill to rebuild
>
>
>
> cypress would be  beautiful. Especially stained and varnished. The Meadows
> book has the IHC s/n in it. I would like to see that sifter/spout set up.
> Ron
>
> 2009/4/23 Kevin Harbin <kharbin at nctv.com>
>
> *I just acquired ANOTHER 20” Meadows sold by IHC.  My first one was an
> early model, bearing the WC MEADOWS stencil as well as the older IHC
> stencil.  This one has the MEADOWS only stencil and the later INTERNATIONAL
> stencil.  Last I talked with Wisconsin, there were no serial # lists on the
> IHC mills, as their #’s were not the same format as regular Meadows.  There
> is a very odd weevil and sifter shaker arrangement I’ve never seen
> consisting of 3 exterior springs.  I’ll try to upload a few pics of it to my
> webpage and link to it here in the next few days.*
>
> *ANYWAY, I’m going to have to rebuild it, just like my last.  I have
> acquired some cypress to build it from.  Anyone ever used cypress on a
> mill?  Pros/cons?*
>
> *Thanks*
>
> *Kevin*
>
> * *
>
> Kevin S. Harbin
>
> Seneca, SC
>
> (
>
>
>
>
> _______________________________________________
> Gristmillers mailing list
> Gristmillers at gristmillers.com
> http://lists.gristmillers.com/mailman/listinfo/gristmillers
>
>
>
>
> --
> Carolina Grits & Co.
> Visit us at Carolinagrits.com
>
> _______________________________________________
> Gristmillers mailing list
> Gristmillers at gristmillers.com
> http://lists.gristmillers.com/mailman/listinfo/gristmillers
>
>


-- 
Carolina Grits & Co.
Visit us at Carolinagrits.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.gristmillers.com/pipermail/gristmillers/attachments/20090430/3e38716b/attachment.html